Corrosion behaviour of Mg-Gd-Y-Zn-Ag alloy components with different sizes after cooling

The corrosion behaviour of Mg-6Gd-3Y-1Zn-0.3Ag (wt.%) alloy components with different sizes after cooling was investigated. The alloys in the small components (SC) cooled fast, which were composed of α-Mg matrix and coarse long-period stacking ordered (LPSO) phases. The alloys in the large components (LC) cooled slowly, and there were thin lamellar LPSO phases precipitating inside the grains, except for α-Mg matrix and coarse LPSO phases. The hydrogen evolution test revealed that the corrosion rate of LC sample was higher than that of SC sample. Electrochemical impedance spectroscopy (EIS) test showed that the surface film on LC alloys provided worse protection. The corrosion morphologies indicated that the precipitation of the thin lamellar LPSO phases in LC sample caused severe micro-galvanic corrosion, which accelerated the rupture of the surface film.     

Single Cell Bioprinting with Ultrashort Laser Pulses

Tissue engineering requires the precise positioning of mammalian cells and biomaterials on substrate surfaces or in preprocessed scaffolds. Although the development of 2D and 3D bioprinting technologies has made substantial progress in recent years, precise, cell-friendly, easy to use, and fast technologies for selecting and positioning mammalian cells with single cell precision are still in need. A new laser-based bioprinting approach is therefore presented, which allows the selection of individual cells from complex cell mixtures based on morphology or fluorescence and their transfer onto a 2D target substrate or a preprocessed 3D scaffold with single cell precision and high cell viability (93–99% cell survival, depending on cell type and substrate). In addition to precise cell positioning, this approach can also be used for the generation of 3D structures by transferring and depositing multiple hydrogel droplets. By further automating and combining this approach with other 3D printing technologies, such as two-photon stereolithography, it has a high potential of becoming a fast and versatile technology for the 2D and 3D bioprinting of mammalian cells with single cell resolution.     

电网设备线夹开裂原因

某电力公司变电站用铝合金设备线夹在运行过程发生批次开裂事故,通过宏观观察、断口分析、化学成分分析、力学性能测试、冷冻模拟试验等方法,对设备线夹的开裂原因和开裂机理进行了分析。结果表明:设备线夹焊缝存在焊接缺陷,导致焊缝强度下降;设备线夹接线管底部存在积水空间,寒冷天气下积水结冰,体积膨胀,使焊缝承受设计工况外的负载而过载开裂,造成了线夹开裂。     

稳定同位素技术在禽类及其制品溯源领域的研究进展

本文基于国内外禽类及其制品溯源的研究成果，针对市场上出现的禽类及其制品的产地和饲养方式造假（如普通鸡蛋冒充地理标志鸡蛋、自由散养鸡蛋、有机鸡蛋等）、禽类饲料成分掺假（如非法添加动物副产品、色素等）等问题，梳理了稳定同位素技术在禽类及其制品可追溯性的应用进展，在此基础上提出禽类及其制品溯源的现存问题和发展方向，以期为稳定同位素技术在禽类及其制品质量安全领域的深入研究及食品溯源体系完善提供参考。     

坛紫菜蛋白质提取工艺优化及其特性分析

为了开展坛紫菜高值化加工利用，以坛紫菜为原料、蛋白质提取率为评价指标，通过考察提取溶剂、超声时间和功率、料液比、pH等单因素实验、正交试验设计优化超声波提取工艺，对其等电点、乳化性、起泡性等基础特性进行分析，并进行抗氧化活性测定。结果表明，在超声全程时间50 min、超声功率1350 W条件下，坛紫菜蛋白质提取率为60.98%±1.01%。同时通过对所提取的坛紫菜蛋白质特性分析结果显示，坛紫菜蛋白质的等电点为4.5，在等电点附近，坛紫菜蛋白质有较好的泡沫稳定性，可达80.84%±2.95%；抗氧化测定结果显示，坛紫菜蛋白质在5~50 mg/mL范围内具有较强的抗氧化活性，浓度为50 mg/mL时，总抗氧化能力为2.89±0.09 U/mL，ABTS+自由基清除能力相当于0.83±0.08 mmol/L Trolox，DPPH清除率在10 mg/mL时达到68.04%±0.73%。该研究可以为坛紫菜资源的开发利用提供一定的理论依据和技术支持。     

Self-healing,elastic and deformable novel composite phase change polymer based on thermoplastic elastomer SEBS for wearable devices

Journal of Materials Science - Form-stable composite phase change materials (C-PCMs) prepared by microencapsulation method and porous matrix adsorption method need for compression molding after...     

碳中和背景下配电网差异化节能降耗潜力评估分

为了提高配电网差异化节能降耗效果，解决现有潜力评估方法存在的应用性能差的问题，提出碳中和背景下配电网差异化节能降耗潜力优化评估方法。根据配电网的空间结构，构建相应的等值电路模型。在该模型下，从设备损耗和运行附加损耗2个方面计算配电网的损耗量。根据损耗量计算结果，确定配电网差异化碳中和节能降耗方式。从静态和动态2个角度设置潜力评估指标，通过指标数据处理、指标权重求解等步骤，得出配电网差异化节能降耗潜力的综合量化评估结果。将设计潜力评估方法应用到配电网的差异化节能降耗改造工作中，能够有效降低配电网的实际线损量、降低区域损耗费用，并具有较高的应用价值。     

PBAT‒PLA膜袋受控需氧堆肥条件下的降解研究

目的 通过对广泛使用的PBAT–PLA生物降解膜袋在受控需氧堆肥条件下的降解机制研究，为生物降解塑料的大规模推广提供重要理论基础。方法 根据GB/T 19277.1—2011，在(58±2)℃需氧条件下，对PBAT–PLA膜袋进行为期160 d的生物降解测试(即工业堆肥)，并以常见的可降解材料微晶纤维素作为参比样品。对降解前后的材料进行红外、扫描电镜、能谱分析，并结合其所在堆肥样本的脂肪酶活性，从多角度探寻降解机制。结果 PBAT–PLA膜袋与微晶纤维素所在的堆肥脂肪酶活性都达到空白堆肥的3倍以上。红外显示由微晶纤维素水分子吸附、糖环打开、基团氧化形成的吸收峰加强，PBAT–PLA膜袋中的酯键峰明显减弱;扫描电镜发现降解的PBAT–PLA膜袋表面覆盖了微生物膜;能谱分析发现，碳元素大幅减少，氧元素增加。结论 微生物在PBAT–PLA膜袋表面生长形成生物膜，分泌大量脂肪酶，水解PBAT–PLA的酯键，使聚合物降解为不同链长的中间体或小分子，同时伴随着氧化，随后被作为碳源，在相关微生物体内被代谢利用，形成最终产物。